Printing on Both Sides of the PaperPhaser® 4510 Laser Printer3-23Printing on Both Sides of the PaperThis section includes:■ Automatic 2-Sided Printing Guidelines on page 3-23■ Binding Edge Options on page 3-24■ Selecting 2-Sided Printing on page 3-24Note: For information about manual two-sided printing, go to the Online Support Assistant atwww.xerox.com/office/4510support.Automatic 2-Sided Printing GuidelinesAutomatic 2-sided printing is available from all trays. Before printing a 2-sided document,verify the following requirements:■ The printer must have a duplex unit installed. The duplex hardware comes standard on thePhaser 4510DX and 4510DT configurations, and it is a option that is available for thePhaser 4510B and 4510N.■ The paper must be a supported size for the tray. For a list of supported paper sizes, seeSupported Paper and Media on page 3-3. For a list of paper types and weights, print thePaper Tips page:a. Select Information, and then press the OK button.b. Select Information Pages, and then press the OK button.c. Select Paper Tips Page, and then press the OK button.The following paper and media cannot be used for 2-sided printing:■ Transparencies■ Envelopes■ Labels■ Any die-cut specialty media, such as business cardsSee also:Supported Paper and Media on page 3-3Printer Configurations on page 1-4
