Printing on Specialty MediaPhaser® 4510 Laser Printer3-416. Insert the tray into the tray slot, and push the tray completely into the printer.7. On the control panel, select the paper type:a. Select Paper Tray Setup, and then press the OK button.b. Select Tray 2 Paper, Tray 3 Paper, or Tray 4 Paper, and then press the OK button.c. If the correct paper size and Labels are displayed as the current setup, select Usecurrent setup and then press the OK button. If the correct media type and size are notdisplayed, change the setup:■ Select Change setup, and then press the OK button.■ Select Labels from the list displayed, and then press the OK button.■ Select the appropriate paper size, and then press the OK button.8. In the printer driver, select either Labels as the paper type or the appropriate tray as thepaper source.Printing Index CardsIndex cards (3 in. x 5 in.) can be printed from Tray 1 only. Index cards can not be used for2-sided printing.To order paper, transparencies, or other specialty media, contact your local reseller or go towww.xerox.com/office/4510supplies.4510-111
