Connections and Internet Protocol (TCP/IP)Phaser® 5500 Laser Printer3-8Manually Setting the Printer’s IP AddressNoteEnsure that your computer has a properly configured IP address for your network. Contactyour network administrator for more information.If you are on a network without a DNS server, or in an environment where the networkadministrator assigns printer IP addresses, you can use this method to manually set the IPaddress. Manually setting the IP address overrides DHCP and AutoIP. Alternatively, if you arein a small office with a single PC and use a dialup modem connection, you can manually setthe IP address.1. At the printer's front panel, select Printer Setup, then press the OK button.2. Select Connection Setup, then press the OK button.3. Select Network Setup, then press the OK button.4. Select TCP/IP Setup, then press the OK button.5. Select DHCP/BOOTP, then press the OK button to select Off.6. Select TCP/IP Address, then press the OK button.7. Enter the printer’s IP address, then press the OK button.infoSMART Knowledge Base Documents (English only)For more information, go to www.xerox.com/office/5500infoSMART to view thesedocuments.Reference Name TitleR1002033188 Basic TCP/IP Tutorial and Home Networking GuidelinesR1015020333 Installing the Printer Driver in Windows 9x When Using a USB ConnectionR1015020339 Installing the Printer Driver in Windows 2000 When Using a USBConnectionR1015020349 Installing the Printer Driver in Windows XP When Using a USB ConnectionR1015020355 Installing the Printer for a USB Connection in Mac OS 9R1015020367 Installing the Printer for a USB Connection in Mac OS X 10.3.1 (and later)R1002018545 Understanding TCP/IP Addressing and Subnetting Basics
