Printer SettingsPhaser® 5500 Laser Printer1-14To select the output tray:1. At the printer’s front panel, select Printer Setup, select Paper Handling Setup, thenselect Paper Destination.2. Select either Standard Output Tray, Stacker Upper Tray or Stacker Lower Tray,then press the OK button.NoteThe printer driver overrides the front panel settings for output tray selection.Selecting Job OffsetThe Stacker Lower Tray and Standard Output Tray can place sheets in alternate positions toseparate one print job from another. This is called job offsetting. There are several joboffsetting options from which to choose:■ Off: No job offsetting occurs and the output position is not changed for the output trayselected.■ On: The output position changes after the final sheet of the print job is printed. The nextprint job is then offset to keep it separate from the previous print job.NoteWhen the stapling option is used for print jobs, job offsetting is activated.To select the job offset option:1. At the printer’s front panel, select Printer Setup, then press the OK button.2. Select Paper Handling Setup, then press the OK button.3. Select Job Offset, then press the OK button.4. Select either On or Off, then press the OK button.Preventing Access to Front Panel SettingsTo prevent access to front panel settings, you can lock the front panelsettings from CentreWare IS. A lock icon appears next to items in the frontpanel that cannot be accessed by users.
