Printer SettingsPhaser® 5500 Laser Printer1-16Printing the Startup Page Using the Front PanelTo print the “Startup Page”:1. Select Information, then press the OK button.2. Select Information Pages, then press the OK button.3. Select Startup Page, then press the OK button to print.Accessing Load Paper TimeoutWhen your print job is formatted for a type or size of paper that is not loaded in the printer, theprinter’s front panel displays a message requesting you to load the appropriate paper. The LoadPaper Timeout controls the amount of time the printer waits before printing on another type orsize of paper.To change the load paper timeout, use either:■ The printer’s front panel■ CentreWare ISUsing the Printer’s Front PanelTo change the load paper timeout:1. Select Printer Setup, then press the OK button.2. Select Paper Handling Setup, then press the OK button.3. Select Load Paper Timeout, then press the OK button.4. Scroll to the desired timeout value. The values (None, 1, 3, 5, or 10 minutes, 1 hour or24 hours) indicate the length of time you want the printer to wait for you to load paperbefore printing. If you select a value of None, the printer does not wait for paper to beinserted and immediately picks paper from the default tray.5. Press the OK button to save the change.Using CentreWare ISTo change the load paper timeout:1. Launch your web browser.2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).3. Select Properties.4. Select the General folder on the left sidebar.5. Select Printer Defaults.6. Scroll to the desired Load Paper Timeout value in Timeout Settings. The values (None,1, 3, 5, or 10 minutes, 1 or 24 hours) indicate the length of time you want the printer towait for you to load paper before printing. If you select a value of None, the printer doesnot wait for paper to be inserted and immediately picks paper from the default tray.7. Click Save Changes at the bottom of the screen.
