Windows 98 and Windows MePhaser® 5500 Laser Printer3-28Verifying Settings1. Right-click Network Neighborhood on the desktop, then click Properties.2. Click the Configuration tab. A list of installed network components appears for thefollowing items:■ Client for Microsoft networks■ Xerox TCP/IP Port Monitor3. If you are running CentreWare DP verify the following:■ Novell Networks: You are required to load Novell IntraNetWare Client or MicrosoftClient for IPX networks.■ TCP/IP Networks: No additional software is required, but your printer must have avalid TCP/IP address assigned.4. If any of the above protocols or services are not installed, install the necessary componentsand restart the system. When the system is restarted, return to this document.5. Click Start, click Settings, then click Printers. The Printers window appears.6. Right-click the printer icon, then click Properties.7. Select the Details tab.8. Verify the following:a. The printer driver name in the Print Using the Following Driver list. If necessary, re-select or install a new printer driver.b. The Port name in the Print to the Following Port list. If necessary, re-select thecorrect name.9. Send a print job to the printer. If the printer does not print, access PhaserSMARTTechnical Support from the Troubleshooting tab of the Windows printer driver or go towww.xerox.com/office/support.infoSMART Knowledge Base Documents (English only)For more information, go to www.xerox.com/office/5500infoSMART to view thesedocuments.Reference Name TitleR100207118 Installing a Windows 98/Me printer driver
