Phaser® 5500 Laser PrinterCopyright © 2004 Xerox Corporation. All Rights Reserved.3-29MacintoshThis topic includes:■ "Requirements" on page 3-29■ "Quick CD-ROM Install Steps" on page 3-29■ "Enabling and Using EtherTalk for Mac OS 9.x" on page 3-29■ "Enabling and Using TCP/IP for Mac OS 9.x" on page 3-30■ "Enabling or Using TCP/IP or AppleTalk for Mac OS X, Version 10.1 and Higher" onpage 3-32■ "Macintosh Troubleshooting (Mac OS 9.x, Mac OS X, Version 10.1 and Higher)" onpage 3-33■ "infoSMART Knowledge Base Documents (English only)" on page 3-34Requirements■ A workstation with the appropriate printer driver installed.■ A working knowledge of the operating system (OS 9.x or higher) being used on theworkstation.■ Proper cabling to connect the printer to the network.Quick CD-ROM Install Steps1. Insert the Printer Installer and Utilities CD-ROM into the computer’s CD-ROM drive.2. Double-click the installer on the Printer Installer and Utilities CD-ROM to install theprinter driver.Enabling and Using EtherTalk for Mac OS 9.xIf you use EtherTalk, Macintosh computers do not require IP addresses.1. Open the AppleTalk Control Panel. Verify that the Ethernet port is the selected networkport.2. Open the Chooser, then click the LaserWriter printer driver.3. Select the printer.4. Click Create to create the desktop printer.
