6-42 Phaser 6121MFP Service ManualAdjustments and CalibrationsClear DataSRAM ClearFunctionTo clear the errors and reset settings to default for the following functions.• Menu: Set to default• User Service Mode: Set to default• Display: [Print Report] - [TX/RX Result] Clear• Fax function: Clear• Service’s Choice: Set to defaultNotes• Before executing SRAM Clear, record the settings that are initialized throughSRAM Clear.• For recording the setting values, it is a good idea to print the reports and lists.• Some settings are not included in any reports or lists. Make a note of themseparately.• After SRAM Clear has been executed, reenter the recorded data.Memory ClearFunctionTo clear the settings for the functions listed below and return the functions to theirdefault settings:• Service’s Choice: Set to default.• Fixed Zoom Change: Set to default.Notes• Before executing Memory Clear, record the setting values that are to beinitialized through Memory Clear.• For recording the setting values, it is a good idea to print the reports and lists.• Some settings are not included in any reports or lists. Make a note of themseparately.• After Memory Clear has been executed, make necessary entries of data againbased on the recorded values.
