Phaser 6121MFP Service Manual A-7ReferenceCopy MenuThis section contains:• “Copy Menu – Main” on page A-7• “Copy Default Setup Menu” on page A-8To access the Copy Menu, press the Copy button on the control panel.Copy Menu – MainMenu Item ContentsPaper Source Specifies the tray to use and the type and size of thepaper in the tray when making copies.Scale Specifies the image size of the copy in comparison tothe original:■ Manual – Enter the desired size.■ Preset Sizes – Select from a list of preset sizes.Lighten/Darken Specifies how light or dark the resulting copied imageis (also called “copy density”).Original DocumentTypeSpecifies the type of content being copied:■ Mixed, Fine/Mixed – Text with images/photos.■ Photo, Fine/Photo – Photos only.■ Text, Fine/Text – Text only.Sides (Duplex)(Phaser 6121MFP/Dprinter configurationonly)Specifies the setting for double-sided copying:■ 1 to 1 – Copying on one side only.■ 1 to 2 – Copying on two sides:Long Edge Flip – Copied pages are printed sothat they flip over at the side, along the long edgeof the paper.Short Edge Flip – Copied pages are printed sothat they flip over at the top, along the shortedge of the paper.Collate(Phaser 6121MFP/Nand /D printerconfigurations only)Specifies whether the copied pages of multi-pagedocuments are printed in order and sorted by copyset.2-Up Copy(Phaser 6121MFP/Dprinter configurationonly)When selected, two single-sided document pages arecopied and then printed onto one side of a singlesheet of paper. The copies are reduced to fit on thesize of the selected output page.Special Copy Mode ■ ID Copy – Used for copying ID cards. The back andfront of a document are copied at full size onto oneside of a single sheet of paper■ None (Normal Copy)■ Poster Copy – The length and width of the copieddocument are each enlarged 200% and are printedon four pages.■ Clone Copy – Repeat copying; used to copy smalldocuments onto one piece of larger paper.
