6. Slide the tray all the way into the printer.7. If the Tray Mode is set to Fully Adjustable, the printer prompts you to set the papertype, size and color.a) If the paper type, size and color are correct, touch OK.b) If the paper type, size or color are incorrect, change the settings.• To select a paper type, touch the current paper type, then from the list, selectEnvelope.• To select a size, touch the current size setting, then from the list, selectCustom. Touch the Length field and select a number value. Touch the Widthfield and select a number value. Select OK.• To select a different color, touch the current paper color, then from the list,select the color.c) To save the settings, touch OK.8. From the Print dialog at your workstation, select the paper setting values and clickOK. To feed and print the envelopes, click Print.LabelsYou can print labels from the Bypass Tray or Tray 1.Guidelines for Printing Labels• Use labels designed for laser printing.• Do not use vinyl labels.• Do not feed a sheet of labels through the printer more than once.• Do not use dry gum labels.• Print only on one side of the sheet of labels. Use full-sheet labels only.• Store unused labels flat in their original packaging. Leave the label sheets inside theoriginal packaging until ready to use. Return any unused label sheets to the originalpackaging and reseal it.• Do not store labels in extremely dry or humid conditions or extremely hot or coldconditions. Storing labels in extreme conditions can cause print-quality problems orcause labels to jam in the printer.• Rotate stock frequently. Long periods of storage in extreme conditions can causelabels to curl and jam in the printer.6-21Xerox® VersaLink® C600 Color PrinterUser GuidePaper and Media
