Accessing the Embedded Web ServerAt your computer, open a Web browser. In the address field, type the IP address of theprinter, then press Enter or Return.Finding the IP Address of Your PrinterTo install the print driver for a network-connected printer, you need the IP address ofyour printer. You also need the IP address to access the settings of your printer throughthe Embedded Web Server. You can view the IP address of your printer on the controlpanel or on the Configuration Report.NoteTo view the TCP/IP address on the control panel, wait until the printer has been on for2 minutes. If the TCP/IP address is 0.0.0.0, or begins with 169, it indicates a networkconnectivity issue. However, note that if Wi-Fi is set as the primary Ethernet connection,0.0.0.0 is shown for the printer’s IP address.Viewing the IP Printer Address on the Control PanelTo view the IP address of the printer on the control panel:1. At the printer control panel, press the Home button.2. Touch Device > About.3. Record the IP address from the display.4. To return to the Home screen, press the Home button.Obtaining the Printer IP Address from the Configuration ReportTo obtain the printer IP address from the Configuration Report:1. At the printer control panel, press the Home button.2. Touch Device > About > Information Pages.3. Touch Configuration Report.The IP address appears in the Connectivity section of the Configuration Report forIPv4 or IPv6.4. To return to the Home screen, press the Home button.Installation and SetupFor reference:• Installation Guide packaged with your printer• Online Support Assistant at www.xerox.com/office/VLC600docsInstallation and Setup OverviewBefore you print, ensure that your computer and the printer are plugged in, powered on,and connected. Configure the initial settings of the printer, then install the print driversoftware and utilities on your computer.2-9Xerox® VersaLink® C600 Color PrinterUser GuideGetting Started
