• Ensure that any parts removed during cleaning are replaced before you plug in theprinter.Cleaning the PrinterCleaning the ExteriorClean the exterior of the printer once a month.• Wipe the paper tray, output tray, control panel, and other parts with a damp, softcloth.• After cleaning, wipe with a dry, soft cloth.• For stubborn stains, apply a small amount of mild detergent to the cloth and gentlywipe the stain off.CautionDo not spray detergent directly on the printer. Liquid detergent could enter the printerthrough a gap and cause problems. Never use cleaning agents other than water or milddetergent.Cleaning the InteriorWarningNever touch a labeled area on or near the heat roller in the fuser. You can get burned.If a sheet of paper is wrapped around the heat roller, do not try to remove it immediately.Power off the printer immediately and wait 40 minutes for the fuser to cool. Try toremove the paper jam after the printer has cooled.To prevent stains inside the printer that can deteriorate print quality, clean the interiorof the printer regularly. Clean the printer interior whenever you replace a drum cartridge.After clearing paper jams or replacing a toner cartridge, inspect inside the printer beforeclosing the printer covers and doors.• Remove any remaining pieces of paper or debris.• Remove any dust or stains with a clean, dry, lint-free cloth.Cleaning the LED LensesIf prints have voids or light streaks through one or more colors, use the followinginstructions to clean the LED lenses.Xerox® VersaLink® C600 Color Printer7-2User GuideMaintenance
