You can connect to your printer directly from your computer using USB, or connect toa network using an Ethernet cable or wireless connection. Hardware and cablingrequirements vary for the different connection methods. Routers, network hubs andswitches, modems, Ethernet cables, and USB cables are not included with your printerand must be purchased separately. Xerox recommends an Ethernet connection becauseit is typically faster than a USB connection, and it provides access to the Embedded WebServer.For more information, refer to the System Administrator Guide atwww.xerox.com/office/VLC600support.Selecting a Location for the Printer1. Select a dust-free area with temperatures from 10–32°C (50–90°F), and relativehumidity 10–85%.NoteSudden temperature fluctuations can affect print quality. Rapid heating of a coldroom can cause condensation inside the printer, directly interfering with imagetransfer.2. Place the printer on a level, solid, non-vibrating surface with adequate strength tohold the weight of the printer. The printer must be horizontal with all four feet insolid contact with the surface.To find the weight for your printer configuration, refer to Weights and Dimensions.3. Select a location with adequate clearance to access supplies and to provide properventilation.To find the clearance requirements for your printer, refer to Clearance Requirements.4. After positioning the printer, you are ready to connect it to the power source andcomputer or network.Opening the Output Tray ExtensionTo provide better support for your prints, open the Output Tray Extension. For printingon longer paper, lengthen the Output Tray Extension by pulling out the extender untilit stops.Xerox® VersaLink® C600 Color Printer2-10User GuideGetting Started
