Connecting to a Wired Network1. Ensure that the printer is powered off.2. Attach a Category 5 or better Ethernet cable from the printer to the network or routersocket. Use an Ethernet switch or router, and two or more Ethernet cables. Connectthe computer to the switch or router with one cable, then connect the printer to theswitch or router with the second cable. Connect to any port on the switch or routerexcept the uplink port.3. Attach the power cord, then plug in the printer and power it on.4. Set the network IP printer address, or set up the printer for automatic printer IPdetection. For more information, refer to the System Administrator Guide atwww.xerox.com/office/VLC600support.Connecting to a Wireless NetworkA wireless local area network (WLAN) provides the means to connect 2 or more devicesin a LAN without a physical connection. The printer can connect to a wireless LAN thatincludes a wireless router or wireless access point. Before connecting the printer to awireless network, the wireless router must be configured with a service set identifier(SSID) and any necessary credentials.NoteWireless networking is available only on printers with the optional Wireless NetworkAdapter installed.Installing the Wireless Network AdapterThe optional Wireless Network Adapter plugs in to the back of the printer. After theadapter is installed, and wireless networking is enabled and configured, the adapter isable to connect to a wireless network.To install the Wireless Network Adapter:1. Power off the printer.Xerox® VersaLink® C600 Color Printer2-12User GuideGetting Started
