4. To adjust registration, select the source paper tray.a. Touch Paper Supply.b. Touch the desired tray.5. Using the chart printed in Verifying Paper Registration, select the side for registration.a. For adjusting Side 1, touch Adjusted Side, then touch Side 1.b. For adjusting Side 2, touch Adjusted Side, then touch Side 2.6. To adjust the registration, touch Lead/Side Registration.a. To adjust the side-to-side registration, for Side Registration, touch the Plusicon (+) or the Minus icon (-).b. To adjust the top-to-bottom registration, for Lead Registration, touch the Plusicon (+) or the Minus icon (-).For reference, position the chart so that Side-1 or Side-2 dots are at the bottomof the page.• For Lead Registration, a positive value shifts the image down the page.• For Side Registration, a positive value shifts the image to the left.7. To save your settings, touch OK.8. As needed, to enter additional values, repeat the previous steps.9. Print another sample page, then repeat the process until you complete theregistration corrections.10. To return to the Home screen, press the Home button.Transfer Voltage AdjustmentUse Transfer Voltage Adjustment to specify the bias transfer roller voltage for printingon the selected paper type. If the printed image is too light, increase the voltage for thepaper you are using. If the printed image is mottled or blotchy-looking, decrease thevoltage for the paper you are using.To adjust the transfer voltage:1. At the printer control panel, press the Home button.2. Touch Device > Support > Transfer Voltage Adjustment.Xerox® VersaLink® C600 Color Printer7-10User GuideMaintenance
