Xerox WorkCentre 5016 User Manual

Also see for WorkCentre 5016: User guide Specification

Contents

Xerox WorkCentre 5016 User Manual Manual pdf 10 page image

Safety NotesXerox WorkCentre 5016/5020 User Guide10MaintenanceAny operator product maintenance procedures will be described in the customerdocumentation supplied with the product. Do not carry out any maintenanceprocedures on this product which are not described in the customer documentation.Cleaning Your ProductBefore cleaning this product, unplug the product from the electrical outlet. Always usematerials specified for this product. The use of other materials may result in poorperformance and may create a hazardous situation. Do not use aerosol cleaners, theymay be explosive and flammable under certain circumstances.WARNING - Electrical Safety InformationZ Only use the power cord supplied with the equipment.Z Plug the power cord directly into a grounded electrical outlet easily accessible. Donot use an extension cord. If you do not know whether an outlet is grounded, consulta qualified electrician.Z Improper connection of the equipment-grounding conductor can result in an electricshock.X Do not place this equipment where people might step on or trip over the power cord.X Do not override or disable electrical or mechanical interlocks.X Do not obstruct the ventilation openings.X Never push objects of any kind into slots or openings on the equipment.Z If any of the following conditions occur, switch off the power to the machineimmediately and disconnect the power cord from the electrical outlet. Call anauthorized local service representative to correct the problem.– The equipment emits unusual noises or odors.– The power cord is damaged or frayed.– A wall panel circuit breaker, fuse, or other safety device has been tripped.– Liquid has spilled into the equipment.– The equipment is exposed to water.– Any part of the equipment is damaged.Disconnect DeviceThe power cable is the disconnect device for this equipment. It is attached to the backof the machine as a plug-in device. To remove all electrical power from the equipment,disconnect the power cable from the electrical outlet.Laser Safety InformationCAUTION: Use of controls, adjustments or performance of procedures otherthan those specified herein may result in hazardous light exposure.With specific regard to laser safety, the equipment complies with performancestandards for laser products set by government, national and international agencies asa Class 1 laser product. It does not emit hazardous light, as the beam is totally enclosedduring all phases of customer operation and maintenance.Downloaded From ManualsPrinter.com Manuals