A1: Document JamsXerox WorkCentre 5016/5020 User Guide109A1: Document JamsIf a document jams in the Document Feeder, the machine stops, and an error code [A1]appears in the Display. The Document Feeder Jam indicator on the Machine Diagram(mimic) flashes.The following procedure describes how to remove the jammed documents in theDocument Feeder.Note • The Document Feeder is not fitted as standard on some machine configurations.1. Pull up the latch to open the DocumentFeeder Cover.2. Remove the jammed document.Note • When the document jams tightly inthe Document Feeder Roller andcannot be pulled out, pull it outfrom under the Document FeederTray as shown in Steps 5 to 7.3. Close the Document Feeder Cover.4. If the error persists, or if you cannot findany jammed documents, lift up theDocument Feeder Tray.5. Remove the jammed document fromunder the Document Feeder Tray.6. Gently put the Document Feeder Trayback to its original position.7. Make sure that the document is nottorn, wrinkled, or folded before loadingit again in the Document Feeder.Note • Torn, wrinkled or folded documents may cause document jams. To copy suchdocuments, place them on the Document Glass.LatchDownloaded From ManualsPrinter.com Manuals
