Loading DocumentsXerox WorkCentre 5016/5020 User Guide55Loading DocumentsWhen loading an original document to copy, you can place it on the Document Glass,or load it in the Document Feeder. This section describes how to place documents onthe Document Glass and in the Document Feeder. Information is also given on thepaper capacity and the supported paper types for the Document Glass and theDocument Feeder.Document GlassThe Document Glass supports a single sheet, a book, and other similar types of originaldocuments in sizes up to 297 x 432 mm. The machine does not automatically detectthe size of the original document that is placed on the Document Glass.Important • Close the Document Cover while scanning a document on the Document Glass. Do notleave the Document Cover open when not in use.1. Open the Document Cover.2. Place the document face down on theDocument Glass, and align it with thetop left corner.Note • If the size of the loaded documentis smaller than any standard sizes,the edges of the loaded documentmay create shadow, and mayappear to have an outline on thecopied output.3. Close the Document Cover.LEF orientationSEF orientationDownloaded From ManualsPrinter.com Manuals
