System SettingsXerox WorkCentre 5016/5020 User Guide123System SettingsThe following procedure describes how to configure the system settings.If the machine is in the No Account Mode1) Proceed to Step 1 of the following procedure.If the machine is in the Single Account Mode1) Refer to "Logging in to the Machine" (P.68) to log in to the machine.2) Proceed to Step 1 of the following procedure.If the machine is in the Multiple Account Mode1) Refer to "Logging in to the Machine" (P.69) to log in to the machine under theSystem Administrator’s account.2) Proceed to Step 1 of the following procedure.1. Hold down the button forfour second.The machine enters the System SettingMode.The letter [P] appears blinking in theDisplay.2. Enter a menu number that you wish to configure using the numeric keypad inreference to "System Setting List" (P.124).3. Press the button to confirm the entered menu number.The currently set value of the menu number appears blinking in the Display.4. Enter a new value using the numeric keypad in reference to "System Setting List"(P.124).Note • Automatically erases the previously set value in the Display as you start entering a newvalue.buttonDownloaded From ManualsPrinter.com Manuals
