Supported Paper Sizes and TypesXerox WorkCentre 5016/5020 User Guide41Supported Paper TypesThe following table shows the paper types that are supported with each of the trays andDuplex Module.O: AvailableX: Not available*: Paper weight is 70 - 90 g/m2 for the Duplex ModuleStoring and Handling PaperStoring paper• Store paper in dry conditions. Paper that has absorbed moisture can cause paperjams and image quality deterioration.• Once you remove the packaging from paper, keep the unused paper wrapped. Toreduce moisture, apply preventive measures such as by placing desiccant (moistureabsorber) in the storage area.• Paper should be stored on a flat surface to prevent creasing or warping.Loading paper into the trays• Align the edges of the paper stack neatly before loading it in the trays.• Do not use paper that is folded, creased, curled, or heavily damaged.• Do not load paper of mixed sizes together in the trays.• Transparency paper and label paper often cause paper jams if any sheets of paperare stuck together. Fan the edges of these types of paper well before loading.• When continuously printing onto transparencies, remove transparencies from theOutput Tray every 20 sheets or so to prevent them from sticking to one another.• When loading label paper in the tray, if any labels have already been peeled off orcut off, it may cause a paper jam.Paper Type Weight(g/m 2) Tray 1 Tray 2 BypassTrayDuplexModulePlain Paper 60 - 90 O O O O*Recycled Paper O O O OTransparency - X X O XLabels - O O O XHeavyweight 90 - 110 X X O XDownloaded From ManualsPrinter.com Manuals
