Xerox WorkCentre 5016/5020 User Guide838 ScanningThis chapter describes the scan driver (TWAIN driver) and the scan application (ButtonManager), and provides the basic scanning procedure.The Scan Driver (TWAIN driver) and Button ManagerThis section provides information on the TWAIN driver and Button Manager.TWAIN driverThe TWAIN driver allows you to acquire an image that is scanned on the machine. Youcan import a scanned image to a computer through the TWAIN driver.For information on how to install the scan driver (TWAIN driver), refer to "Installing the Print Driver and the ScanDriver (TWAIN driver)" (P.34).Button ManagerButton Manager is a scanner application that can be installed on a computer, whichallows you to scan a document that has been loaded on the machine, and to convertthe scanned document into a BITMAP file, a PDF file, or a TIFF file. This scannerapplication uses the TWAIN driver to acquire images scanned on the machine, so theTWAIN driver must be installed on the computer in order to use this application.For information on how to install Button Manager, refer to "Installing the Scanner Application (Button Manager)"(P.38).Scanning Procedure (Using the TWAIN driver)The following procedure describes a basic scanning procedure when using the TWAINdriver.1. Load a document.• When scanning a document from the Document Feeder1) Place a document face up in thecenter of the Document Feeder.Note • The indicator on the MachineDiagram (mimic) lights up when adocument is loaded correctly in theDocument Feeder. If the indicatordoes not light up, the documentmay not be loaded properly in theDocument Feeder.Downloaded From ManualsPrinter.com Manuals
