IPP InstallationXerox WorkCentre 7232/7242 System Administration Guide 119NOTE: If you enable IP Filtering at the machine user interface without first configuringit through Internet Services, then you will not be able to access the machine’s InternetServices web page or print to the machine.11. When you have finished establishing TCP/IP, select [Close] on the [ProtocolSettings] screen.Workstation SetupInstall a print driver on each client workstation that will be sending print jobs to themachine, and map to the machine as a printer. Refer to the HTML document in PCLPrint Driver CD-ROM, for additional information."/ipp" needs to be entered at the end of the string in order for the printer to bediscovered.If you specify the printer using the IP address, use one of the following formatsdepending on your machine configuration. The IPv6 format is supported on WindowsVista only. An IPv6 address needs to be enclosed in square brackets.(For IPv4) http://xxx.xxx.xxx.xxx/ipp(For IPv6) http://[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]/ippTest PrintTo make sure that the machine has been installed on the network correctly a test printshould be submitted from each client workstation. Perform the following steps.1. Open a document on a client workstation.2. Select the machine as the printer to which the selected document will be sent.3. Print the document on the machine and verify that it prints correctly.4. Make sure that the driver is installed on every workstation that will be sending jobsto the machine.5. Repeat the test for all workstations that will be sending jobs to the machine.The installation process is now complete.
