13 Scanning Services142 Xerox WorkCentre 7232/7242 System Administration GuideProcedure for Scan to PC (SMB)1. On the control panel, select [Scan to PC].2. Enter all the information required.3. Load a sample document into the document feeder.4. Press the button on the machine.5. Logon to the SMB server. Navigate to the directory path (repository) that was setup earlier on the server. Your scanned document can be found in the specifieddirectory.NOTE: If Kerberos authentication (remote authentication) has been enabled, aseparate login screen appears when the Scan to SMB feature is selected. Documentsare not scanned in unless the Kerberos server authenticates user access.Scan to HTTPThe device can be configured to scan to either an HTTP or an HTTPS destination. Toset up a remote template pool repository, see the next procedure.NOTE: See the Quick Scan Features Setup Guide for information about how to set uptemplates, repositories, transfer protocols, and enabling ports.To configure the Scan Repository Details using CentreWare Internet Services:1. At your workstation, open your Web browser and enter the IP address of themachine in the Address or Location field. Press Enter.2. Click the Properties tab.3. Click the Services folder, then the Network Scanning folder.Data to Set Up Scan to PC(SMB)InstallRequirement CommentsServer IP address Required This is the IP address of the SMB server.Server Shared Name Required This is the name assigned to the sharedfolder on the SMB server.Repository – directory path, wherethe document will be stored on theSMB serverRequired This is the location or path of the directory forsaving scanned documents.SMB Login/password information Optional This is required, if the SMB server requireslogin/password authentication. Most SMBservers require a login/password.Kerberos IP Address Optional If Remote Authentication is required, thenKerberos needs to be enabled.
