4 UNIX TCP/IP50 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide15. When you have finished establishing TCP/IP, select [Close] from the [ProtocolSettings] screen.Workstation SetupThis section explains how to change the workstation OS for Solaris, SunOS, and HP-UX workstations. Refer to the relevant instructions below.Solaris – page 51SunOS – page 52HP-UX – page 53Print language/mode/logical printerA printer name for logical printer should correspond to the print language/mode to beused for printing, or to the Logical Printer Number which was registered throughCentreWare Internet Services.*: OptionYou can also add output parameters to the above printer name. The parameters arethe same as those for -C option. Insert “_” between the printer name and outputparameter, for example “PS_A4”.NOTE: If specifying a printer name other than above at printing, the print language ormode specified on the touch screen of the machine is used.NOTE: When setting print languages/modes from the same workstation to a singleprinter, it is recommended to set one kind each. If two or more kinds of languages/modes are set, the workstation may display the same job number for some query(lpq).Printer Name Print Language/Mode/Logical PrinterPS* PostScriptPSASC/PSA* PostScriptPSBIN/PSB* PostScriptPCL PCLLP Print language which was specified on the touch screen of themachine.DUMP/DMP Dump modeAUTO/ATO Auto detection modeTIFF/TIF TIFF direct printTIFF%n TIFF (%n: Logical Printer Number 1 to 10 which wereregistered through CentreWare Internet Services.)PS%n* PostScript (%n: Logical Printer Number 1 to 10 which wereregistered through CentreWare Internet Services.)
