Xerox WorkCentrePro 123 System Administration Manual

Also see for C123 Copycentre: Manual Installation guide Evaluator guide Brochure & specs Install guide

Contents

Xerox WorkCentrePro 123 System Administration Manual Manual pdf 76 page image

6 Microsoft Networking76 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide3. For Windows 95/Windows 98/Windows Me, enter the password (SMBAdministrator Password) only. For Windows NT 4.0/Windows 2000/Windows XP,enter the user name (SMB Administrator Name) and password (SMBAdministrator Password).Then, click [OK]. The [admintool] folder will be opened.NOTE: The factory default for the System Administrator Name is [11111], and thedefault System Administrator Password is [x-admin]. You are advised to change thename and password from the default ones.4. Open [config.txt] using a text editing application, for example Notepad.NOTE: [config.txt] can also be changed from CentreWare Internet Services.5. Make changes to the appropriate items, and then save and close [config.txt].NOTE: For more information about [config.txt], refer to Setting Format of config.txt onpage 76.The [message.txt] file is then created inside the [admintool] folder.6. Open [message.txt] and check that it displays the information shown in thefollowing table.NOTE: If [message.txt] is not displayed, select [Refresh Status] from the [View] menu.If an error message appears, check the information has been set correctly in[config.txt].7. Close [message.txt].8. Switch off the machine. After the display on the touch screen clears, switch on themachine again.NOTE: The changes you have made will be enabled either after switching off and on,or after saving [config.txt] with its Reboot option set to [Yes].Setting Format of config.txtItem Remarks Value DefaultPrinter Language Language to be used English EnglishHost Name Host name of the machine Maximum15 bytesFX-xxxxxx(xxxxxx: last 6characters of theMAC address ofthe machine)Workgroup Name of printer workgroup Maximum15 bytesWORKGROUPNetBEUI Activation of NetBEUI protocol On/Off OnTCP/IP Activation of TCP/IP protocol On/Off On