Scanning32 Xerox Card Scanner 200 User’s GuideEditing or Deleting Scan ConfigurationsEditing and deleting is normally for the configurations you create, not for your scanner’s pre-setconfigurations.NOTE: Your scanner comes with a number of configurations pre-set at the factory. To ensure that yourscanner will always have a set of correct scan configurations, do not delete the pre-set configurations. Wealso recommend that you keep those configurations locked so they are not inadvertently deleted. Thatway, you will always have the factory-settings available. If you do delete or edit them, and want to get thefactory pre-sets back again, you will need to uninstall then re-install your scanner.To edit or delete a scan configuration:1. Open the One Touch Properties window.2. Select the scan configuration you want to edit or delete.• To delete the configuration, click the Delete button.• To edit the configuration, click the Edit button.Edit the settings and click OK.3. Click OK to close the One Touch Properties window.Select the scanconfiguration to edit ordelete. It must beunlocked, as indicatedby not having a lockdisplayed here.
