Xerox Card Scanner 200 User’s Guide 33ScanningConfigure Before ScanYou can set up the scanner so that, when you put a page in, a different scanning interface opens before thescanning starts. To set up the scanner for this capability, you select Configure Before Scan from the scanconfiguration list.Choosing Configure Before Scan simply opens either the TWAIN or WIA scanning interface when youinsert a page. You can then use the interface to change the Resolution, Scan Mode, and other settings.When you scan, the scanned image will still be sent as the file type and to the same DestinationApplication already selected in the One Touch Properties window for that button.The option Configure Before Scan can be used when you want to scan multiple pages and have themappear in one file.To set Configure Before Scan:1. Open the One Touch Properties window.2. Select the scan configuration Configure Before Scan.3. Right-click on Configure Before Scan and choose an interface to use for configuring before scanning.TWAIN—The TWAIN Interface opens for you to make changes prior to scanning. See “Scanning fromthe TWAIN Interface” on page 62.WIA—The Windows Image Acquisition (WIA) Interface opens for you to make changes prior toscanning. See “Scanning from the Windows Image Acquisition Interface” on page 66.4. Click OK or Apply on the One Touch Properties window.Select then right-clickon Configure BeforeScan to get the menu,and choose theinterface to use forscanning.
