Xerox Card Scanner 200 User’s Guide 81Appendix A NoticesSection 1: Safety IntroductionNotices and SafetyPlease read the following instructions carefully before operating the machine and refer to them as neededto ensure the continued safe operation of your machine.Your Xerox product and supplies have been designed and tested to meet strict safety requirements. Theseinclude safety agency evaluation and certification, and compliance with electromagnetic regulations andestablished environmental standards.The safety and environment testing and performance of this product have been verified using Xeroxmaterials only.WARNING: Unauthorized alterations, which may include the addition of new functions or connection ofexternal devices, may impact the product certification. Please contact your Xerox representative for moreinformation.Section 2: EMCThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with theinstruction manual, may cause harmful interference to radio communications.WARNING: In order to allow this equipment to operate in close proximity to Industrial, Scientific andMedical (ISM) equipment, the external radiation from ISM equipment may have to be limited orspecial mitigation measures taken.Changes and modifications to this equipment not specifically approved by Xerox may void the user’sauthority to operate this equipment.Section 3: Operational Safety InformationYour Xerox equipment and supplies have been designed and tested to meet strict safety requirements.These include safety agency examination, approval, and compliance with established environmentalstandards.To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at alltimes: