Xerox XCARD-SCAN User Manual

Also see for Nuvera 200: Hints and tips Hints and tips Getting started guide Paper guide Datasheet

Contents

Xerox XCARD-SCAN User Manual Manual pdf 63 page image

Scanning58 Xerox Card Scanner 200 User’s GuideSetting Paper Pickup OptionsYou can set how you want the scanner to respond when you put a page in the scanner. The options are forturning this feature on or off, and changing the amount of time it takes for the scanner to recognize whena page has been place in the paper feed slot.Enable the generation of events:Selecting the option Enable the generation of events when paper is inserted into the scanner simplymeans that you want the scanner to automatically scan when a page is inserted into the scanner.This option is selected by default on install of the scanner. If you want to scan from the One Touch buttonpanel on screen, you need to deselect this option. Click on OK to save the changes and close the window.Paper pickup delay:You can set a delay time for the scanner to wait before feeding the page through the scanner. Using apaper pickup delay allows you to make sure the page is straight in the scanner before the scanner feeds itthrough. If the Paper pickup delay is at 0 ms (milliseconds), the scanner starts as soon as the paper sensordetects a page in the paper feed slot.This option is disabled if Enable the generation of events is deselected.1. Click on the drop menu next to Current Event and select which button, Scan or Custom, that you wantto change the settings for.2. Click on the drop menu next to Paper pickup delay.3. Select one of the options from the list.Moderate (500 ms) is the default selection for this option.4. Click on OK to save the changes and close the window.Click on Reset Device to return the option in this Control section back to the original factory setting.