FaxingAutomatically Suppressing Background VariationWhen scanning originals printed on thin paper, text or images printed on one side of the paper can beseen on the other side. Use the Auto Suppression setting to reduce the sensitivity of the printer tovariations in light background colors.To select Auto Suppression:1. Press the Services Home button, then touch Fax.2. Touch the Image Quality tab, then touch Image Enhancement.3. Under Background Suppression, touch Auto Suppression.4. Touch OK.Adjusting the ContrastContrast is the relative difference between light and dark areas in an image.To adjust the contrast:1. Press the Services Home button, then touch Fax.2. Touch the Image Quality tab, then touch Image Enhancement.3. On the Image Enhancement screen, select an option:− Manual Contrast allows you to adjust the contrast manually. Under Manual Contrast, movethe slider up or down to increase or decrease the contrast. The middle position on the slider,Normal, does not change the contrast.− Auto Contrast allows the printer to set the contrast automatically.4. Touch OK.Specifying the Size of the OriginalTo ensure that you are scanning the correct area of the documents, specify the original size.To specify the original size:1. Press the Services Home button, then touch Fax.2. Touch the Layout Adjustment tab, then touch Original Size.3. On the Original Size screen, select an option:− Auto Detect: This options allows the printer to determine the size of the original.Note: The Auto Detect option is enabled only when the original is loaded in the duplex automaticdocument feeder.− Preset Scan Areas specifies the area to scan when it matches a standard paper size. In thescrolling list, touch the desired paper size.− Custom Scan Area allows you to specify the height and width of the area to scan. To specifyan area, touch the Length (Y) and Width (X) arrows.4. Touch OK.114 Xerox® WorkCentre® 3655 Multifunction PrinterUser Guide
