Maintenance2. With a dry soft lint-free cloth or paper towel, wipe the feed rollers and the separation pad until theyare clean.Note: If the duplex automatic document feeder feed rollers and separation pad get stained withtoner or debris, they can cause stains on the documents. To remove stains, use a soft lint-free clothdampened with a neutral detergent or water.Cleaning the InteriorTo prevent stains inside the printer that can deteriorate print quality, clean the interior of the printerregularly. Clean the printer interior whenever you replace the drum cartridge.After clearing paper jams or replacing a toner cartridge, inspect the inside of the printer before closingthe printer covers and doors.• Remove any remaining pieces of paper or debris. For details, see Clearing Paper Jams on page 155.• Remove any dust or stains with a dry, clean cloth.WARNING: Never touch a labeled area on or near the heat roller in the fuser. You can get burned. Ifa sheet of paper is wrapped around the heat roller, do not try to remove it immediately. Switch offthe printer immediately and wait 40 minutes for the fuser to cool. Try to remove the jam after theprinter has cooled.Xerox® WorkCentre® 3655 Multifunction Printer 139User Guide
