YASKAWA A1000 Series Quick Start Manual

Also see for A1000 Series: Installation manual Technical manual Quick start guide Technical manual Manual

Contents

B Parameter List152 YASKAWA ELECTRIC TOEP C710616 21C YASKAWA AC Drive - A1000 Quick Start GuideF6-08<3>Reset CommunicationParameters0: Communication-related parameters (F6-) are not reset when the drive isinitialized using A1-03.1: Reset all communication-related parameters (F6-) when the drive isinitialized usingA1-03.Default: 0Min: 0Max: 1F6-10 CC-Link Node Address Sets the node address if a CC-Link option card is installed.Default: 0Min: 0Max: 64F6-11 CC-Link CommunicationSpeed0: 156 Kbps1: 625 Kbps2: 2.5 Mbps3: 5 Mbps4: 10 MbpsDefault: 0Min: 0Max: 4F6-14 CC-Link bUS Error AutoReset0: Disabled1: EnabledDefault: 0Min: 0Max: 1F6-20 MECHATROLINK StationAddressSets the station address when the MECHATROLINK-II option has beeninstalled.Default: 21Min: 20Max: 3FHF6-21 MECHATROLINK FrameSize0: 32 byte1: 17 byteDefault: 0Min: 0Max: 1F6-22 MECHATROLINK LinkSpeed0: 10 Mbps1: 4 MbpsDefault: 0Min: 0Max: 1F6-23 MECHATROLINK MonitorSelection (E) Sets the MECHATROLINK-II monitor (E).Default: 0Min: 0Max: FFFFHF6-24 MECHATROLINK MonitorSelection (F) Sets the MECHATROLINK-II monitor (F).Default: 0Min: 0Max: FFFFHF6-25 Operation Selection atWatchdog Timer Error (E5)0: Ramp to stop. Decelerate to stop using the deceleration time in C1-02.1: Coast to stop.2: Fast Stop. Decelerate to stop using the deceleration time in C1-09.3: Alarm only.Default: 1Min: 0Max: 3F6-26 MECHATROLINK bUSErrors Detected Sets the number of option communication errors (bUS).Default: 2Min: 2Max: 10F6-30 PROFIBUS-DP NodeAddress Sets the node address.Default: 0Min: 0Max: 125F6-31 PROFIBUS-DP Clear ModeSelection0: Resets drive operation with a Clear mode command.1: Maintains the previous operation state when Clear mode command is given.Default: 0Min: 0Max: 1F6-32 PROFIBUS-DP Data FormatSelection0: PPO Type1: ConventionalDefault: 0Min: 0Max: 1F6-35 CANopen Node ID Selection Sets the node address.Default: 0Min: 0Max: 126F6-36 CANopen CommunicationSpeed0: Auto-detection1: 10 kbps2: 20 kbps3: 50 kbps4: 125 kbps5: 250 kbps6: 500 kbps7: 800 kbps8: 1 MbpsDefault: 6Min: 0Max: 8F6-50 DeviceNet MAC Address Selects the drives MAC address.Default: 0Min: 0Max: 64No. Name Description Setting