10.6.3 Digital input10.6.3.1 Overviewn 16xDC 24Vn Sub module ‘DI16/DO12’nÄ Chap. 5.4 ‘Digital input’ page 11110.6.3.2 Parametrization in SPEED7 Studio10.6.3.2.1 ‘I/O addresses’Sub module Input address Access AssignmentDI16/DO12 136 BYTE Digital input I+0.0 ... I+0.7 (X4)137 BYTE Digital input I+1.0 ... I+1.7 (X4)10.6.3.2.2 ‘Inputs’Here you can specify a hardware interrupt for each input in groups of 2 channels for thecorresponding edge. The hardware interrupt is disabled, if nothing is selected (defaultsetting). A diagnostics interrupt is only supported with Hardware interrupt lost.Here is valid:n Rising edge: Edge 0-1n Falling edge: Edge 1-0n The input delay can be configured per channel in groups of 4.n An input delay of 0.1ms is only possible with "fast" inputs, which have a max. inputfrequency of 100kHzÄ Chap. 5.4 ‘Digital input’ page 111. Within a group, the inputdelay for slow inputs is limited to 0.5ms.n Range of values: 0.1ms / 0.5ms / 3ms / 15ms10.6.4 Digital output10.6.4.1 Overviewn 12xDC 24V, 0.5An Sub module ‘DI16/DO12’nÄ Chap. 5.5 ‘Digital output’ page 11510.6.4.2 Parametrization in SPEED7 Studio10.6.4.2.1 ‘I/O addresses’Sub module Output address Access AssignmentDI16/DO12 136 BYTE Digital output Q+0.0 ... Q+0.7 (X5)137 BYTE Digital output Q+1.0 ... Q+1.3 (X5)‘Trigger for processinterrupt’Input delayVIPA System MICRO Configuration with VIPA SPEED7 StudioDeployment I/O periphery > Digital outputHB400 | CPU | M13-CCF0000 | en | 18-50 237
