8. With ‘Context menu è Copy RAM to ROM’ you can save your project on a memorycard, if one is plugged.10.8.3 Transfer via memory cardThe memory card serves as external storage medium. There may be stored several proj-ects and sub-directories on a memory card. Please regard that your current project isstored in the root directory and has one of the following file names:n S7PROG.WLDn AUTOLOAD.WLD1. Start the SPEED7 Studio with your project.2. Click in the ‘Project tree’ at the CPU.3. Create in the SPEED7 Studio with ‘Context menuè Export device configuration (WLD)’ a wld file.ð The wld file is created. This contains the user program and the hardware config-uration4. Copy the wld file at a suited memory card. Plug this into your CPU and start itagain.ð The transfer of the application program from the memory card into the CPUtakes place depending on the file name after an overall reset or PowerON.S7PROG.WLD is read from the memory card after overall reset.AUTOLOAD.WLD is read from the memory card after PowerON.The flickering of the yellow LED of the status bar of the CPUmarks the active transfer. Please regard that your user memory serves forenough space for your user program, otherwise your user program is not com-pletely loaded and the red LED of the status bar lights up.Proceeding transfer viamemory cardVIPA System MICRO Configuration with VIPA SPEED7 StudioSPEED7 Studio - Project transfer > Transfer via memory cardHB400 | CPU | M13-CCF0000 | en | 18-50 257
