3.2.3.2 LEDs Ethernet PG/OP channelL/ALink/ActivitygreenSSpeedyellowDescriptionX The Ethernet PG/OP channel is physically connected to the Ethernetinterface.X There is no physical connection.X Blinking: Shows Ethernet activity.The Ethernet interface of the Ethernet PG/OP channel has a transferrate of 100Mbit.The Ethernet interface of the Ethernet PG/OP channel has a transferrate of 10Mbit.not relevant: X3.2.4 Memory managementThe CPU has an integrated memory. Information about the capacity of the memory maybe found at the front of the CPU. The memory is divided into the following parts:n Load memory 128kbyten Code memory (50% of the work memory)n Data memory (50% of the work memory)n Work memory 64kbyte– There is the possibility to extend the work memory to its maximum capacity128kbyte by means of a VSC.3.2.5 Slot for storage mediaIn this slot you can insert the following storage media:n VSD - VIPA SD-Card– External memory card for programs and firmware.n VSC - VIPASetCard– External memory card (VSD) for programs and firmware with the possibility tounlock optional functions like work memory and field bus interfaces.– These functions can be purchased separately.Ä Chap. 4.15 ‘Deployment storagemedia - VSD, VSC’ page 98– To activate the corresponding card is to be installed and a Overall reset is to beestablished.Ä Chap. 4.12 ‘Overall reset’ page 94To avoid malfunctions, you should use memory cards of VIPA. These cor-respond to the industrial standard. A list of the currently available VSDrespectively VSC can be found at www.vipa.comX3/X4: LEDsGeneralOverviewVIPA System MICRO Hardware descriptionStructure > Slot for storage mediaHB400 | CPU | M13-CCF0000 | en | 18-50 47
