4.3 Addressing4.3.1 OverviewTo provide specific addressing of the installed peripheral modules, certain addressesmust be allocated in the CPU. This address mapping is in the CPU as hardware configu-ration. If there is no hardware configuration, depending on the slot, the CPU assignsautomatically peripheral addresses for digital in-/output modules starting with 0 andanalog modules are assigned to even addresses starting with 256.4.3.2 Default address assignment of the I/O partSub module InputaddressAccess AssignmentAI5/AO2 800 WORD Analog input channel 0 (X6)802 WORD Analog input channel 1 (X6)Sub module InputaddressAccess DescriptionDI24/DO16 136 BYTE Digital input I+0.0 ... I+0.7 (X1)137 BYTE Digital input I+1.0 ... I+1.7 (X5)Sub module InputaddressAccess DescriptionCounter 816 DINT Channel 0: Counter value / Frequency value820 DINT Channel 1: Counter value / Frequency value824 DINT Channel 2: Counter value / Frequency value828 DINT Channel 3: Counter value / Frequency valueSub module OutputaddressAccess DescriptionDI24/DO16 136 BYTE Digital output Q+0.0 ... Q+0.7 (X2)137 BYTE Digital output Q+1.0 ... Q+1.3 (X6)Sub module OutputaddressAccess DescriptionCounter 816 DWORD reserved820 DWORD reserved824 DWORD reserved828 DWORD reservedVIPA System MICRODeployment CPU M13-CCF0000Addressing > Default address assignment of the I/O partHB400 | CPU | M13-CCF0000 | en | 18-5066
