YASKAWA Varispeed-606PC3 Instruction Manual

1 . VS-606P03 INVERTER MAIN' UNIT (Gont'd)OPERATION BYDIGITAL OPERATOR" Enter the program mode(depress pq I V E key) and setNo. 01 data to 0000 by usingOpera- Need not to change the mode C) , or RE ET key.tion since operation mode by digsMethod operator is set at the factory.Selec-tionSelect frequency referencevalue display CU U U,~ by Turn the frequency setterknob to the left to decreasedepressing D S P L key on value fully . (frequencyOpera- digital operator. reference=0)tion - Depress ENTER key after setting Turn ON FWD or REV runfrequency value by using E, signal .or gT key. - Turn the frequency setterknob slowly to the right toDepress R N key. increase value fully.Stop-ping - Depress " STOP key.POWER ON*Models' without digital operator (models with indicating cover) creed not thisoperation .Note : Refer to Par. 2.4 "DIGITAL OPERATOR OPERATION EXAMPLE" (page74) for details of digital operator operation.-40-OPERATION BYCONTROL CIRCUITTERMINAL INPUT(Standard setting of modelswith indicating cover)Then depress ENAER key.Enter the drive mode(depress p R I V E key).After above operation,command from control circuitterminal can be received.*Turn the frequency setterknob slowly to the left todecrease value fully.Turn OFF FWD or REV runsignal.