Yaesu FT-2980R Operating Manual

Also see for FT-2980R: Operating manual

Contents

17 DT A/MFunction: Enables/Disables the DTMF Autodialer feature.Available Values: MANUAL / AUTODefault: MANUAL18 DT DLYFunction: Setting of the DTMF Autodialer’s TX Delay Time.Available Values: 50 / 250 / 450 / 750 / 1000 msDefault: 450 ms19 DT SETFunction: Loading of the DTMF Autodialer Memories.See page 28 for details.20 DT SPDFunction: Setting of the DTMF Autodialer Sending Speed.Available Values: 50 (high speed) / 100 (low speed) msDefault: 50 ms21 EDG.BEPFunction: Enables/Disable the Band-edge beeper while scanning.Available Values: ON / OFFDefault: OFF22 INT CDFunction: Selects the Access Numbers (DTMF digits) for WIRES™ Internet linking.Available Values: DTMF 0 - DTMF 9 / DTMF A - DTMF FDefault: DTMF 123 INT MDFunction: Selects the Internet Link Connection mode.Available Values: SRG / FRGDefault: SRG24 INT.A/MFunction: Enables/Disables DTMF Autodialer feature while using the Internet Connec-tion feature.Available Values: MANUAL / AUTODefault: MANUAL25 INT.SETFunction: Selects the memory register for an Access Number (DTMF code) for non-WiRES Internet Link System access.Available Values: F0 - F9Default: F126 LOCKFunction: Selects the Control Locking Lockout combination.Available Values: KEY / DIAL / K+D / PTT / K+P / D+P / ALLDefault: OFFNote: “K” = “Key;” “D” = “Dial;” and “P” = “PTT”.66“Set” (Menu) ModeFT-2980R Operating Manual