Yaesu FT-2980R Operating Manual

Also see for FT-2980R: Operating manual

Contents

40 PSWDFunction: Programs and activates the Password feature.Available Values: ON / OFFDefault: OFF41 RESUMEFunction: Selects the Scan Resume mode.Available Values: BUSY / HOLD / 3SEC / 5SEC / 10SECDefault: BUSYBUSY: The scanner will hold until the signal disappears, then will resumewhen the carrier drops.HOLD: The scanner will stop when a signal is received, and will not re-start.3SEC/5SEC/10SEC: The scanner will hold for the selected resume time, then resumewhether or not the other station is still transmitting.42 RF SQLFunction: Adjusts the RF Squelch threshold level.Available Values: S1 - S9 / OFFDefault: OFF43 RPTFunction: Sets the Repeater Shift direction.Available Values: –RPT / + RPT / SIMPDefault: SIMP44 RVRTFunction: Enables/disables the “Priority Channel Revert” feature.Available Values: ON / OFFDefault: OFF45 S SRCHFunction: Selects the Smart Search Sweep mode.Available Values: SINGLE / CNTNUEDefault: SINGLESINGLE: The transceiver sweeps the current band once in each direction, starting onthe current frequency. All channels where activity is present (up to 15 in eachdirection) are loaded into the Smart Search memories. Whether or not all 31memories are filled, the search stops after one sweep in each direction.CNTNUE: The transceiver makes a sweep in each direction as with the “SINGLE”mode, but if all 31 channels are not filled after the first sweep, the radio con-tinues sweeping until they are all filled.46 SHIFTFunction: Sets the magnitude of the Repeater Shift.Available Values: 0.00 - 99.95 MHzDefault: 0.60 MHz69“Set” (Menu) ModeFT-2980R Operating Manual