Yaesu FT-2980R Operating Manual

Also see for FT-2980R: Operating manual

Contents

53 TOTFunction: Sets the Time-Out Timer.Available Values: 1MIN / 3MIN / 5MIN / 10MIN / OFFDefault: 3MINThe time-out timer shuts off the transmitter after continuous transmission of the pro-grammed time.54 TS MUTFunction: Enables/Disables the receiver audio output while the Tone Search Scanner isactivated.Available Values: ON / OFFDefault: ON55 TS SPDFunction: Selects the Tone Search Scanner speed.Available Values: FAST / SLOWDefault: FAST56 VFO.SCNFunction: Selects the VFO Scanner Width.Available Values: ±1MHz / ±2MHz / ±5MHz / ALLDefault: ALL±1 MHz, ±2 MHz, ±5 MHz: The scanner will sweep frequencies within the selectedbandwidth.ALL: The scanner will sweep all frequencies.57 WX ALTFunction: Enables/Disables the Weather Alert feature.Available Values: ON / OFFDefault: OFF58 WX VOLFunction: Selects the audio output level of the Weather Alert Tone.Available Values: NOR.VOL / MAX.VOLDefault: NOR.VOL59 W/N DVFunction: Reduction of the Microphone Gain/Deviation and receiver bandwidth.Available Values: WIDE (±5 kHz Deviation, 15 kHz Bandwidth) / NARROW (±2.5 kHzDeviation, 6 kHz Bandwidth)Default: WIDE (±5 kHz Deviation, 15 kHz Bandwidth)71“Set” (Menu) ModeFT-2980R Operating Manual