Page 78 FT-450D OPERATION MANUALMENU M ODEThe Menu system permits extensive customization of the FT-450D.You can set up your transceiver to operate just the way you want.The Menu’s 62 items are grouped into generally used categories from “EXT MNU” to “VOXGAIN”. The MenuMode may be set to display all 62 items or the abbreviated set of 16 most often used items.USING THE M ENU1. Press and hold in the [F] button for one second.The Menu Item and a title for the Menu Mode willappear in the display.2. Rotate the [DSP/SEL] knob to select the desiredMenu Item.3. Press the [DSP/SEL] knob. The “ ” icon willappear in the display.4. Rotate the [DSP/SEL] knob to change the valueor condition for the Menu Item.The “ ” icon will blink in the display.5. Press the [DSP/SEL] knob. The “ ” icon willappear in the display6. Now, hold in the [F] button for one second to savethe new setting and exit to normal operation.[DSP/SEL] KnobMenu Mode ResetMenu Item or Menu Setting[F] ButtonYou may reset all the Menu settings to theiroriginal factory defaults.1. Turn the front panel [POWER] Button off.2. While holding in [F] button, press the[POWER] Button to turn the transceiveron.[POWER] Button [F] ButtonMENU FUNCTION AVAILABLE VALUES DEFAULT SETTINGEXT MNU (EXTENSION MENU) ON / OFF ONA&FDIAL (AM&FM DIAL) DISABLE / ENABLE DISABLEAPO (APO TIME) OFF / 1 ~ 12 (h) OFFBCN TIM (BEACON TIME) OFF / 1 ~ 255 (sec) OFFBCN TXT (BEACON TEXT) - -BEEPTON (BEEP TONE) 440 / 880 / 1760 (Hz) 880HzBEEPVOL FIX0 ~ FIX100 or LNK-50 ~ LNK0 ~ LNK+50 FIX10 or LNK-8CAT RTS DISABLE / ENABLE ENABLECAT TOT (CAT TIME OUT TIME) 10 / 100 / 1000 / 3000 (mSec) 10CATRATE 4800 / 9600 / 19200 / 38400 (bps)/DATA 4800CLAR (CLAR DIAL / SEL) DIAL / SEL DIALCLK SFT (CLOCK SHIFT) ON / OFF OFFCONT (DISP CONTRAST) 1 ~ 24 10CW AUTO (CW AUTO MODE) ON / OFF OFFCW BFO USB / LSB / AUTO USBCW DLY (CW DELAY) FULL / 30 ~ 3000 (mSec) 250CW KEY (CW KEY REV) NOR / REV NORCW QSK 15 / 20 / 25 / 30 (mSec) 15CWPADDL (CW PADDLE) KEY / MIC KEYCWPITCH 400 / 500 / 600 / 700 / 800 (Hz) 700