Yaesu FT-450D Operation Manual

Also see for FT-450D: Operating manual Brochure & specs Operation manual Technical supplement Manual

Contents

Page 84 FT-450D OPERATION MANUALMIC EQFunction: Setting of the DSP microphone equalizerAvailable Values: 0 ~ 9Default: 0You may select one of ten available DSP equaliza-tion techniques for transmitted microphone audio.0: Flat1: Low-frequency component is decreased.2: Mid-frequency component is decreased.3: High-frequency component is decreased.4: High-frequency component is enhanced.5: Mid-frequency component is enhanced.6: Low-frequency component is enhanced.7: Low-frequency component is enhanced and High-frequency component is decreased.8: Low-frequency component is decreased and Mid-frequency component is enhanced.9: Low-frequency component is decreased and High-frequency component is enhanced.MICGAINFunction: Setting of the MIC gainAvailable Values: LOW / NOR / HIGHDefault: NORAdjusts the microphone gain level for SSB/AM/FM.LOW: When the microphone input is high the speechprocessor is turned off automatically.NOR: For normal voice the speech processor isturned on automatically.HIGH: When the microphone input is low the speechprocessor is turned on automatically.MICSCAN (MIC AUTO SCAN)Function: “ON/OFF” of microphone scanning func-tionAvailable Values: ON/OFFDefault: ONEnables/disables scanning access via themicrophone’s [UP]/[DWN] keys.OFF: The frequency or the memory channel isscanned only while [UP]/[DWN] button is be-ing pushed. The scanning stops when [UP]/[DWN] button is released.ON: When [UP]/[DWN] button is held for about 1.0second, the scanning continues even after thebutton is released.MY BANDFunction: Setting of the my bandAvailable Values: ON/OFFDefault: ONThe “My Bands” feature allows you to select severalAmateur bands, and make only those bands avail-able for selection via the [BAND]/[BAND] but-tons.ON: Only the bands that are turned on will be shownwhen pushing the [BAND]/[BAND] button.OFF: A Band that is turned off will not appear whenthe [BAND]/[BAND] button is pushed.NOTE:The band presently in use and the General band can-not be turned off.MY MODEFunction: Setting of my modeAvailable Values: ON/OFFDefault: ONThe “My Mode” feature allows you to select an oper-ating mode, and set whether or not the mode will bedisplayed or skipped when the [MODE]/ [MODE]buttons are pressed.This feature can be very useful in HF operation, whenthe AM/FM/DATA modes are not used.ON: Only the mode registered by turning on can beselected by pushing [MODE]/ [MODE]button.OFF: A mode that is turned off will not be appearwhen pressing the [MODE]/ [MODE] but-ton.NOTE:The mode displayed on the display while setting “Mymode” cannot be turned off.P M-DWN (MIC-DWN PG)Function: One of 52 functions can be preset andassigned to the [DWN] key of the microphone.Available Values: Please see page 16.Default: DOWNPresets of various functions can be assigned to the[DWN] key of the microphone using this option.P M-FST (MIC-FAST PG)Function: One of 52 functions can be preset andassigned to the [FST] key of the microphone.Available Values: Please see page 16.Default: FASTPresets of various functions can be assigned to the[FAST] key of the microphone using this option.MENU M ODE