Page 79FT-450D OPERATION MANUALMENU M ODEMENU FUNCTION AVAILABLE VALUES DEFAULT SETTINGCWSPEED 4 wpm (20cpm) ~ 60 wpm (300cpm) 12wpm (60cpm)CWSTONE (CW SIDE TONE) FIX0 ~ FIX100 or LNK-50 ~ LNK0 ~ LNK+50 FIX10 or LNK-8CWTRAIN (CW TRAINING) N: / A: / M: N:CWWEIGT (CW WEIGHT) 1/2.5 ~ 1/4.5 1/3.0D DISP (DATA DISP) -3000 ~ 0 ~ +3000 (Hz) 0D TYPE (DTAT MODE) RTTY / USER-L / USER-U RTTYDIALSTP (DIAL STEP) SSB/CW:1/10/20 (Hz), AM/FM:100/200 (Hz) SSB/CW:10,AM/FM:100DIG VOX OFF / 1 ~ 100 OFFEMERGEN (EMERGENCY) ON / OFF OFFKEYHOLD (KEY HOLD TIME) 0.5 / 1.0 / 1.5 / 2.0 1.0LOCKMOD (LOCK MODE) FREQ / PANEL / ALL FREQM-TUNE ON / OFF ONMEM GRP (MEMORY GROUP) ON / OFF OFFMEM TAG TAG-OFF / TAGNAME TAG-OFFMIC EQ 0 ~ 9 0MICGAIN LOW / NOR / HIGH NORMICSCAN (MIC AUTO SCAN) ON / OFF ONMY BAND ON / OFF ONMY MODE ON / OFF ONP M-DWN (MIC-DWN PG) One of 52 functions (See page 16) DWNP M-FST (MIC-FAST PG) One of 52 functions (See page 16) FASTP M-UP (MIC-UP PG) One of 52 functions (See page 16) UPPEAKHLD (METER PEAK HOLD ) ON / OFF ONPNL-C.S (PANEL’S CUSTOM SWITCH) One of 52 functions (See page 16) VCCQSPL F (QUICK SPLIT FREQ) -20 ~ 0 ~ +20(KHz) +5RFPOWER (RF PWR SET) 5 ~ 100 100RPT (REPEATER SHIFT DIRECTION) - SHIFT / SIMPLEX / +SHIFT SIMPLEXRPT SFT (REPEATER SHIFT OFFSET) 0 ~ 9.99 RTY SFT (RTTY-SHIFT) 170 / 200 / 425 / 850 170RTY TON (RTTY-TONE) 1275 / 2125 (Hz) 2125RTYRPOL (RTTY-RX-POLARITY) NOR / REV NORRTYTPOL (RTTY-TX-POLARITY) NOR / REV NORSCN RES (SCAN RESUME) BUSY / TIME 1 ~ 10 TIME5SELDIAL (SEL DIAL MODE) CWSTONE / CWSPEED / 100KHz /1MHz 100KHZ/ MICGAIN / RFPOWERSQL TYP (SQL TYPE) OFF / ENC / ENC DEC OFFSQL/RFG (SQL/RF GAIN) SQL / RF GAIN RF GAINSTBY BP (STBY BEEP) ON / OFF OFFTONE F (TONE FREQ) 67 ~ 254.1 (Hz) 88.5 (Hz)TOT (TOT TIME) OFF/1 ~ 20 (Min) OFFTUNER (TUNER/ATAS) ATAS / EXT ATU / INT ATU/ INTRATU / F TRANS INT ATUVOX DLY (VOX DELAY) 100 ~ 3000 (ms) 500 (ms)VOXGAIN 1 ~ 100 50: Depends on the transcever’s version