Yaesu FT-70DR Advance Manual

Also see for FT-70DE: Operating manual Operating manual Operating manual Manual Instruction manual

Yaesu FT-70DR Advance Manual Manual pdf 12 page image

12FT-70DR/DE Advance ManualNotification of a Call from a Remote Station by the Bell FunctionThe Bell may be set to sound an Alert when a call from another station containing a cor-responding tone, DCS or pager code is received. “ ” icon on the LCD blinks to providea later notice of the call from the other station.1. Press and hold the [F] key, rotate the DIAL knob to se-lect the Set Mode [8 BELL].2. Press the [F] key.3. Rotate the DIAL knob to select the desired number oftimes (1-20 times or continuous) the Bell rings.  OFF  1T  2T   20T  CONT (continuous)  4. Press the PTT switch to save the setting and return tonormal operation.Bell iconz The default setting is “OFF”.z If setting the “CONT” (continuous), the bell keeps sounding until operating something.User Programmed Reverse CTCSS DecoderThe tone signal frequency can be set at 100 Hz intervals between 300 Hz and 3000 Hzto mute the audio when receiving a signal containing a CTCSS tone matching the pro-grammed tone.1. Press the [F] key, then press the [5](SQ TYP) key.2. Rotate the DIAL knob to select the “PR FRQ”.3. Press the PTT switch to save the setting and return tonormal operation.4. Press the [F] key, then press the [6](CODE) key.The setting screen containing the CTCSS tone frequen-cies is displayed.5. Rotate the DIAL knob to select the desired CTCSStone frequency.6. Press the PTT switch to save the setting and return tonormal operation.