Yaesu FT-70DR Advance Manual

Also see for FT-70DE: Operating manual Operating manual Operating manual Manual Instruction manual

Yaesu FT-70DR Advance Manual Manual pdf 8 page image

8FT-70DR/DE Advance ManualTone squelch featureThe tone squelch opens the speaker audio only when a signal containing the specifiedCTCSS tone is received. The receiver will be quiet while waiting for a call from a specificstation.The tone squelch function does not function in digital mode. Press the [MODE] to change thecommunication mode to Analog FM mode or press and hold the [AMS] key to turn the AMSfunction ON (the AMS icon appears).Setting CTCSS Tone frequencyThe tone frequency may be selected from 50 frequencies (from 67.0 Hz to 254.1 Hz).1. Press the [F] key, then press the [5](SQ TYP) key.2. Rotate the DIAL knob to select the “TSQL”.3. Press the PTT switch to save the setting and return tonormal operation.4. Press the [F] key, then press the [6](CODE) key.The setting screen of the tone frequency is displayed.5. Rotate the DIAL knob to select the tone frequency.6. Press the PTT switch to save the setting and return tonormal operation.z The tone frequency setting is common with the squelch types as follows:TONE, TSQL, RV TN, T DCS, D TONEz The default setting is “88.5 Hz”Searching for the CTCSS Tone transmitted by the other StationSearch and display the tone squelch CTCSS tone transmitted by the other station.1. Press the [F] key, then press the [5](SQ TYP) key.2. Rotate the DIAL knob to select the “TSQL”.3. Press the PTT switch to save the setting and return to normal operation.4. Press the [F] key, then press the [6](CODE) key.The setting screen of the tone frequency is displayed.5. Press the [BAND] key.The transceiver begins searching for a matching tone frequency.When a corresponding tone frequency is detected, a beep sound is emitted, and thedetected tone frequency blinks.The searching stops for 5 seconds and the audio is heard.6. Press the [BAND] key to stop searching.7. Press and hold the [F] key.The detected tone frequency is set.To set the transceiver operation when scanning stops, set the Set Mode [52 SCN.RSM](40). This setting is common with the scan setting, tone search function and DCS searchfunction.