Yaesu FT-70DR Advance Manual

Also see for FT-70DE: Operating manual Operating manual Operating manual Manual Instruction manual

Yaesu FT-70DR Advance Manual Manual pdf 25 page image

25FT-70DR/DE Advance ManualTables of Set Mode OperationsNo. Set ModeItem DescriptionSelectable options(Options in bold are the defaultsettings)1 ANT.ATT Switch the attenuator between ON/OFF. OFF / ON 282 APO Set the length of time until the transceiv-er turns off automatically. OFF / 0.5 Hours to 12 Hours 283 BCLO Turns the busy channel lockout functionON/OFF. OFF / ON 284 BEEP Sets the beep sound function. OFF / KEY+SC / KEY 285 BEP.LVL Beep volume setting LEVEL1 - LEVEL4 - LEVEL7 286 BEP.EDG Sets the beep sound ON or OFF when aband edge is encountered. OFF / ON 297 BEP.STBSets the beep sound ON or OFF whenthe other station completes transmissionin the Digital Mode.OFF / ON 298 BELL Set the bell function settings. OFF / 1 T - 20 T / CONT (Continu-ous ringing) 129 BNK.NAM Assign a name to each memory bank. (up to 6 characters) 1610 BSY.LED Turn the MODE/STATUS Indicator ON orOFF while receiving signals. LED.OFF / LED.ON 3011 CLK.SFT Set the clock shift function. A / B 3012 DC VLT Display the voltage. (Voltage) 3013 DCS.INVSelect a combination of DCS inversioncodes in terms of communication direc-tion.RXN.TXN / RXR.TXN / RXB.TXN /RXN.TXR / RXR.TXR / RXB.TXR 3014 DIMMER Set the brightness level of the LCD back-light and numeric keypad light. LEVEL1 - LEVEL6 3115 DIG.POP Set the POP UP display time. OFF / 2 SEC – 10 SEC- 60 SEC / CONT 3116 DIG VW Turn the VW mode selection ON or OFF. OFF / ON 3117 DP-ID DP-ID list (Display/Register/Clear) (Registered DP-ID) 418 DT DLY Set the DTMF code transmission delaytime.50MS / 250MS / 450MS / 750MS/ 1000MS 3119 DT SET Select and edit the DTMF auto dialermemory channel. CH0 / CH1 - CH9 2120 DT SPD Set the DTMF code transmission speed. 50 MS / 100 MS 3221 DW INT Set the priority memory channel monitor-ing interval during Dual Receive. 0.1 S – 5.0 S – 10.0 S 3222 DW RSM Configure the scan stop mode settingsfor Dual Receive. 2.0 S – 10.0 S / BUSY / HOLD 2023 DW RVT Turn the “Priority Channel Revert” fea-ture ON or OFF during Dual Receive. OFF / ON 3224 GM RNG Select the beep option while receivingdigital GM information. OFF / IN RNG /ALWAYS 33