Yaesu FT-70DR Advance Manual

Also see for FT-70DE: Operating manual Operating manual Operating manual Manual Instruction manual

Yaesu FT-70DR Advance Manual Manual pdf 20 page image

20FT-70DR/DE Advance ManualThe priority memory channel is not set to the Memory channel by default. If using the dualreceive priority memory channel, the priority memory channel must be set.The time interval at which the priority memory channel is monitored for activity may bechanged In the Set Mode [22 DW RSM] ( 32).Activating the Dual Receive (DW) feature1. Set the frequency and communication mode to monitor continually.The monitor frequency may be set on the VFO mode, the memory channel mode orthe HOME channel mode.VFO Dual Receive VFO  Priority Memory ChannelMemory Channel Dual Receive Memory Channel  Priority Memory ChannelHOME Channel Dual Receive HOME Channel  Priority Memory Channel2. Press the [F] key, then press the [V/M](DW) key.“DW” icon appears and the Dual Receive function acti-vates.When a signal is received on the priority channel, thebeep sounds, the “PRI” icon appears and the Dual Re-ceive function stops temporarily. The decimal point ofthe frequency display blinks during the temporary halt.3. Press the [V/M](DW) key to cancel the Dual Receivefunction.The combination of the frequency bands and modes for the Priority Memory Channel and thereceiver monitor frequency can be easily changed. Dual Receive may be operated with theAMS function ON.Setting the Dual Receive (DW) Resume Conditions1. Press and hold the [F] key, and then rotate the DIAL knob to select the Set Mode [22DW RSM].2. Press the [F] key.3. Rotate the DIAL knob to select the resume condition when halting the Dual Receivefunction.• 2.0 S to 10.0 SThe signal is received for the specified period of time, and then the Dual Re-ceive resumes.The Dual Receive resume time may be set from 2 to 10 seconds at 0.5 sec-ond intervals.• BUSYThe signal is received until the signal fades out. Two seconds after the signalfades out, the Dual Receive resumes.• HOLDThe Dual Receive stops and tuning remains on the current receive frequency. (TheDual Receive does not resume.)4. Press the PTT switch to save the new setting and return to normal operation.