Yaesu FT-70DR Advance Manual

Also see for FT-70DE: Operating manual Operating manual Operating manual Manual Instruction manual

Yaesu FT-70DR Advance Manual Manual pdf 13 page image

13FT-70DR/DE Advance ManualConvenient FunctionsSplit MemoryTwo different frequencies, one for receive and another for transmit, may be registered toa memory channel.1. Register the receive frequency to a memory channel first.See “Registering to Memory Channels” (Operating Manual).2. Set the transceiver to the desired transmit frequency.3. Press and hold the [V/M] key.4. Rotate the DIAL knob to select the channel number thatthe receive frequency was registered to on step1.5. While pressing and holding the PTT switch, press the [V/M] key.• The beep sounds and the split memory is saved.• While recalling the split memory,” ” and “ ” is dis-played on the LCD.Registering the receive frequencyRegistering the transmit frequencySplit MemoryRecalling the split memoryWhile operating the split memory, press the [F] key, then press the [HM/RV] key to reverse thetransmit and receive frequencies temporarily When reversing the frequencies, “ ” and “ ” blinkUsing Memory TagMemory name tags (up to 6 characters) may be assigned or changed on the memorychannels and home channels.1. Recall the memory channel or home channel to assign the name tag.2. Press and hold the [F] key, rotate the DIAL knob to select the Set Mode [33 MEM.NAM].3. Press the [F] key.The character input screen is displayed.4. Use the numeric keypad or DIAL knob to input the characters.• Inputting charactersExample quickly Pressing the [2] key, each time switches the following characters:A → B → C → 2 → A → Example Rotating the DIAL switches the following characters.  A - Z  (symbol)  0 - 9  (symbol)  A - Z  • Moving the cursor, deleting the input character[BAND] key: Moves the cursor to the right[MODE] key: Moves the cursor to the leftPressing and holding the [GM] key: Erases all characters after the cursor5. Press the PTT switch to save the setting and return to normal operation.The memory tag is registered to the memory channel, and the Set Mode exits.The memory name tag registered to the channel is automatically displayed as the memory tagindication.