Yaesu FT-7800R Operating Manual

Also see for FT-7800R: Brochure & specs Technical supplement

13FT-7800R OPERATING MANUALFRONT P ANEL C ONTROLS & S WITCHES[LOW(ACC)] KeyPress this key momentarily to select the transmitter power output level (“LOW,” “MID2,”“MID1,” or “HIGH”).Press and hold in this key for 1/2 second to recall the Weather Broadcast Channels.You can program the alternate (press and hold in) function of this key to another func-tion, if desired. See page 60 for details.[BAND(SET)] KeyWhile operating on the VFO mode, press this key momentarily to toggle the operatingband as follows:144 MHz 250 MHz 350 MHz 430 MHz 850 MHz 144 MHz ......In the Memory mode, press this key momentarily to activate the “Memory Tune” func-tion.Press and hold in this key for 1/2 second to enter the Set (“Menu”) mode.[V/M(MW)] KeyPress this key momentarily to switch the frequency control among the VFO, MemorySystem, and Home channel.Press and hold in this key for 1/2 second to transfer the VFO contents into a Memoryregister.[SCAN(SEL)] KeyPress this key momentarily to activate the Scanner.Press and hold in this key for 1/2 second to select the scan mode.[S.SCH(ARTS)] KeysPress this key momentarily to activate the Smart Search feature.Press and hold in this key for 1/2 second to activate the ARTS feature.DIAL knobThis 20-position detented rotary switch is the tuning dial for the transceiver. It is usedfor most tuning, memory selection, and function setting tasks on the transceiver.PWR ( ) SwitchPress and hold in this switch for 1/2 second to toggle the transceiver’s power on and off.[ ] KeyPress this key momentarily to activate the Internet Connection Feature.Press and hold in this key for 1/2 second to indicate access number of the InternetConnection Feature.