Yaesu FT-7800R Operating Manual

Also see for FT-7800R: Brochure & specs Technical supplement

32 FT-7800R OPERATING MANUALThe FT-7800R provides a wide variety of memory system resources. These include: “Regular” Memory Channels, which includes: 1000 “Standard” memory channels, numbered “000” through “999.” 5 Home channels, providing storage and quick recall of one prime frequency on eachoperating band. 50 sets of band-edge memories also known as “Programmable Memory Scan” chan-nels, labeled “L1/U1” through “L50/U50.” 20 Memory Banks, labeled “BANK1” through “BANK20.” Each Memory Bank canbe assigned from the “Standard” Memory Channels. 5 “Hyper-Memory” Channels 10 “Weather Broad-cast” ChannelsMEMORY O PERATIONREGULAR MEMORY C HANNEL O PERATIONMemory Storage1. Select the desired frequency, while operating in the VFO mode. Be sure set up any de-sired CTCSS or DCS tones, as well as any desired repeater offset. The power level maybe also be set at this time, if you wish to store it.2. Press and hold in the [V/M(MW)] key for 1/2 second. Amemory number will appear (blinking) on the display.3. Within ten seconds of pressing the [V/M(MW)] key, usethe DIAL knob or the microphone’s [UP]/[DWN] buttons to select the desired memorychannel for storage (if the channel is already occupied by data stored previously, the“channel frequency” notation will appear on the display).4. To attach an alpha/numeric name “Tag” to the memory,press and hold in the [V/M(MW)] key for 1/2 second,then proceed to the next step; otherwise press the[V/M(MW)] key momentarily to save the entry and exit to normal operation.WX10WX9WX8WX7WX6WX5WX4WX3WX2WX1HOME Channels(5 channels)L50/U50L49/U49L3/U3L2/U2L1/U1000999998003002001Standard Memory Channels(1000 channels)PMS Memory Channels(50 Sets)1-HP2-HP3-HP4-HP5-HP850 MHz Band430 MHz Band250 MHz Band350 MHz Band144 MHz BandRegular Memory ChannelsHyper Memory Channels(5 channels)Weather Broadcast Channels(10 channels)